Pharma Basic Knowledge

Standard Operating Procedure of Pharmaceutical Quality Control Laboratory


  1. Standard Operating Procedure for Sampling of Raw Materials in Pharmaceuticals
  2. Standard Operating Procedure for AQL and Sampling of Packaging Materials (PM) in pharmaceuticals
  3. Standard Operating Procedure for Mobile Phase preparation and Handling
  4. Standard Operating Procedure for Receipt, Handling, Qualification and Numbering of HPLC and UPLC Column
  5. Standard Operating Procedure for Collection and Disposal of HPLC Waste and UPLC Waste
  6. Standard Operating Procedure for Instrument Numbering System
  7. Standard Operating Procedure for Laboratory Instrument Maintenance
  8. Standard Operating Procedure Operation and Cleaning of Shaker Bath
  9. Standard Operating Procedure for Analysis and Release of Raw Materials
  10. Standard Operating Procedure for Analysis and Release of Packaging Materials
  11. SOP for Receipt, Qualification and Handling of Analytical Standards 
  12. SOP for receipt and storage of Samples in Quality Control Laboratory
  13. SOP for Preparation, Standardization and Stability of Volumetric Solution
  14. Standard Operating Procedure for Receipt, Qualification and Handling of Analytical Standards
  15. Standard Operating Procedure for Disposal of Leftover Samples and Scrap
  16. SOP for Retesting of Raw Material-Packaging Material and Semi-Finished Product
  17. Standard Operating Procedure for Calibration of Quality Control Instruments
  18. SOP for DQ, URS Preparation, Installation, Operation and Performance Qualification of Quality Control Instruments
  19. SOP for General Cleaning of QC Department
  20. SOP for Codification, Cleaning and Storage of Sampling Device
  21. SOP for Operation and Cleaning of Vacuum Oven
  22. SOP for for Operation and Cleaning of Vernier Caliper
  23. SOP for Operation and Cleaning of Muffle Furnace
  24. SOP for Operation of Finnpipette
  25. SOP for Operation and Calibration of UV Cabinet
  26. SOP for Handling of Hazardous materials in Quality Control Laboratory
  27. SOP for Procurement and Handling of Pharmacopoeial Revisions
  28. SOP for Chemical Safety in Laboratory
  29. SOP for Operation and Cleaning of Hardness Tester
  30. SOP for Operation and Cleaning of Vortex Mixer
  31. SOP for Handling of Standard Weights for Calibration of Balances
  32. SOP for handling of gas cylinders in Quality Control Laboratory
  33. SOP for Usage and Regeneration of desiccants
  34. SOP for Gowning for raw material and primary packaging material sampling areas
  35. SOP for Standard Operating Procedure for usage of Open Front Containment Booth (OFCB) for sampling of solvents
  36. SOP for conditional release of raw and packing materials
  37. SOP for Analytical Method Transfer
  38. SOP for Calibration Of Calculator
  39. SOP for Annual Maintenance Contract of Instruments
  40. SOP for Receipt, Handling and Storage of Analytical Reagents and Solvents
  41. SOP for Operation and Calibration of Bursting Strength Apparatus
  42. SOP for Receipt, Storage and Handling of Primary Standards
  43. SOP for Operation and Cleaning of Eye Wash and Safety Shower
  44. SOP for Laboratory Safety
  45. SOP for Preparation of Certificate of Analysis
  46. SOP for Operation and Cleaning of Vacuum and Pressure Pump
  47. SOP for Handling of Poisonous Chemicals used in Quality Control Laboratory
  48. SOP for Regeneration of Desiccant (Blue Silica Gel)
  49. SOP for Operation and Cleaning of Sieve Shaker
  50. SOP for Receipt, Handling, Qualification and Numbering of GC Column
  51. SOP for Operation and Calibration of Tapped Density Tester
  52. SOP for Operation and Calibration of Torque Test Apparatus
  53. SOP for Weighing of Sample on an Analytical Balance
  54. SOP for Review of Analytical Reports
  55. SOP for Operation and Cleaning of Scott Volumeter
  56. SOP for External Calibration of Instrument or Equipment in Quality Control Lab
  57. SOP for Handling of Spillage in the Quality Control Laboratory
  58. SOP for Handling of Rejected Material in QC Lab
  59. SOP for Operation of Digital Flow Meter
  60. SOP for Operation and Calibration of Viscometer
  61. SOP for Operation and Calibration of Laboratory Oven
  62. SOP for Operation and Calibration of Osmometer
  63. SOP for Reporting of Raw Material and Working Standard Potency
  64. SOP for Operation of Pin Hole Tester
  65. SOP for Storage of under test samples in Quality Control Laboratory
  66. SOP for Handling Out of Calibration
  67. SOP for Writing of the Instrument Status Label in Quality Control Department
  68. SOP for Analysis and Release of Stock Transfer Material from one code to another
  69. SOP for Operation and Calibration of Sub Sieve Sizer
Scroll to Top